KL3007 - Introduction to Principles of Electricity

APPLY NOW BOOK AN OPEN DAY Add to My Courses Register your interest / Course PDF

What will I learn on this module?

This module will introduce you to the fundamental principles of electricity. You will learn about the application of electrical circuits analysis theory to solve electrical problems, such as resistor networks, voltage dividers, RC circuits and rectifiers. You will consider Ohm’s Law, Joule’s Law and Kirchoff’s law extensively to assist your understanding of electrical circuit analysis. You will learn about the basic concepts and application principles of DC circuits. Topics include terms and symbols, basic electrical and electronic components/devices, electrical measurement instruments and the laws of DC circuits, including series and parallel connections. You will cover how Ohm’s law and Joule’s law are used to calculate the power supply of batteries and power consumption of resistors. You will also learn about A.C. circuits including topics like safety, terms and symbols, sine waves, AC electrical theory and AC measurement instruments. You will understand about Digital logic circuits and numbering systems: These topics include principles of NOT/AND/OR/XOR gates, terms and symbols, combinational gates, Boolean expression, truth table and circuit schematics. These topics are foundations for the generation and use of electricity in a range of applications.

How will I learn on this module?

You will learn through a combination of lectures, laboratory workshops and directed and independent learning. You will gain knowledge of basic AC/DC/Digital circuit analysis at the lectures and will undertake problem solving and hands-on learning through well-designed laboratory exercises. The lectures will be delivered utilising an integrated approach to allow learning with maximum information dissemination. The content is primarily based upon a broad review of electrical and electronic principles.. You will have several opportunities to practice the application of knowledge by using a problem based learning approach. Lecture handouts will be distributed and/or uploaded to e-learning portal online at the beginning of each semester. Multimedia techniques such as videos and animations will also be used for student to grasp abstract concepts (such as sinusoidal signals). Formative feedback will also be provided with integrated quizzes and problems to solve. Laboratory workshops are in smaller groups and can provide a rich feedback framework based on problem based learning, where students can contextualize the theory in an appropriate practical lab session. This session also provides the appropriate learning tools and electrical hardware (such as breadboards, oscilloscopes, signal generators) for gaining hands-on experience.

How will I be supported academically on this module?

You will be supported by the module team through scheduled lectures, seminars and workshop (laboratory) sessions. For effective learning in laboratory activities, it is important to question the results and link the work performed to the theoretical study in the module lectures. Appropriate use of the eLearning Portal (online platform) is made in the module where the module taught content is provided along with links to both the reading list support, tutorial questions and appropriate web sites showing the relation of the theory to the industrial context of the module. Additional support is provided in this module in the form of Individual contact -- students may visit the office of Lecturers/Lab tutors to ask questions related to the module outside the scheduled contact time. You will be encouraged to develop your curiosity by making direct contact with the module team through email or a blackboard discussion forum in which you can actively engage with the staff and student peers in a dynamic learning space enabling you to clarify and resolve issues of concern. You will also be regularly directed to supporting resources including relevant texts, student software downloads and relevant multimedia materials, accessible via eLP. References to these resources will be made available through the e-learning portal and in lectures and seminars.

What will I be expected to read on this module?

All modules at Northumbria include a range of reading materials that students are expected to engage with. The reading list for this module can be found at: http://readinglists.northumbria.ac.uk
(Reading List service online guide for academic staff this containing contact details for the Reading List team – http://library.northumbria.ac.uk/readinglists)

• Introduction to Electric Circuit Analysis, R L Boylestad, Merril Pub. Co. 2010 12th edition.
• Digital Fundamentals, T L Floyd, Merril Pub. Co. 2009 10th edition.
• Electrical Engineering: Principles and Applications, , Pearson 2013, International Edition.
• Fundamentals of Electrical Engineering and Technology, W.D. Stanley, J.R. Hackworth, R.L. Jones, Cengage learning 2006, 1st edition.
• Schaum’s outline of Basic Electrical Engineering, J.J. Cathey, S.A. Nasar, McGraw Hill 1997, 2nd Edition.

What will I be expected to achieve?

You will be able to:

Knowledge & Understanding:
MLO1. Understand the concepts and principles of electricity, especially in regard to the basic DC, AC and digital electrical circuits and electrical safety.

Intellectual / Professional skills & abilities:
MLO2. Gather, integrate and evaluate information from various sources including technical literature and laboratory workshops.

MLO3. Use mathematical approaches and apply electrical principles to analyse basic electrical circuits.

MLO4. Build and test basic electrical circuits and gain hand-on experiences of using practical lab equipment and solving practical problems in electricity.

Personal Values Attributes (Global / Cultural awareness, Ethics, Curiosity) (PVA):
MLO5. Willingly take on the professional and ethical responsibilities of physicists and mathematicians.

How will I be assessed?

Summative Assessments

Assessments will include a laboratory assessment and assignment (report) (30%, MLO 1, 2, 4, 5) and an end of year final exam – 2 hours (70%, MLO 1, 3, 4).

Formative Assessments

Verbal formative feedback will be provided on laboratory work, tutorials, class tests and examination. The formative feedback is designed to assist the students in advancing their knowledge and understanding of the subject matter.

Pre-requisite(s)

NA

Co-requisite(s)

NA

Module abstract

This module aims to provide a foundation in electrical principles, covering fundamental concepts of basic Direct Current (DC) circuits, Alternating Current (AC) circuits, digital logic circuits and their applications. Topics include terms and symbols, basic electrical and electronic components/devices, laws of DC/AC/digital circuits, measurement instruments and electrical safety. Experiences and skills of circuit analysis and problem-solving will also be gained through hands-on laboratory exercises. The fundamentals are introduced at the molecular level, developed through analytical techniques and applied as an introduction to devices and systems.

Course info

UCAS Code F232

Credits 20

Level of Study Undergraduate

Mode of Study 1 year full-time followed by a further 3 years full-time study or 4 years with a placement (sandwich)/study abroad

Department Mathematics, Physics and Electrical Engineering

Location City Campus, Northumbria University

City Newcastle

Start September 2019 or September 2020

Current, Relevant and Inspiring

We continuously review and improve course content in consultation with our students and employers. To make sure we can inform you of any changes to your course register for updates on the course page.

Your Learning Experience find out about our distinctive approach at 
www.northumbria.ac.uk/exp

Admissions Terms and Conditions - northumbria.ac.uk/terms
Fees and Funding - northumbria.ac.uk/fees
Admissions Policy - northumbria.ac.uk/adpolicy
Admissions Complaints Policy - northumbria.ac.uk/complaints