KB6032 - Civil Engineering Research Project

What will I learn on this module?

You will learn to establish the scope, aims and objectives of a research topic, developing a clear problem statement and identifying specific research questions to be answered. You will learn to critically review published literature relating to the topic, including how to distinguish between different types of literature such as peer-reviewed or ‘grey’ literature. You will learn how to select research methods appropriate to answer your research questions and how to design a programme of research to achieve your project aims with the resources at your disposal. You will then gain knowledge and experience in applying specific research methods, for example laboratory practice or specific applications software for computer modelling. You will learn how to critically evaluate research results and how to draw specific conclusions against objectives set out at the start of the project. You will then learn how to structure and write an appropriate technical output detailing your findings and how to consider various options for disseminating your findings to a wider audience, for example posters, conference papers, journal articles and client reports. Underlying all this you will learn to identify and manage health and safety risks, risks to the successful completion of the project and any ethical issues associated with your project.

How will I learn on this module?

You will learn by means of an initial short series of lectures/presentations, setting out the aspects of project work which are general to all students, including scoping, setting aims and defining research questions, literature reviewing and safety, risk and ethical concerns. After this you will self-direct your project with the aid of regular meetings with your academic supervisor who will give you tailored advice at every stage.

How will I be supported academically on this module?

For the individual research project, formative assessment will be through regular interaction with your project supervisor, either face to face or online. Your supervisor will discuss the progress of the work regularly with you, make suggestions and, where necessary, advise on any significant changes of direction for the work. The feedback involved in these discussions will be aimed at allowing you to reflect and feed forward improvements to the work. Written and verbal feedback will be provided on the final work submitted for the project to allow you to reflect for the future.

What will I be expected to read on this module?

All modules at Northumbria include a range of reading materials that students are expected to engage with. The reading list for this module can be found at: http://readinglists.northumbria.ac.uk
(Reading List service online guide for academic staff this containing contact details for the Reading List team – http://library.northumbria.ac.uk/readinglists)

What will I be expected to achieve?

Knowledge & Understanding:
1. Demonstrate subject-specific knowledge related to the topic of your project and how it fits into a wider civil engineering context.
2. Employ the process of research, including defining the topic, selecting appropriate methods and dissemination of findings to potential beneficiaries.

Intellectual / Professional skills & abilities:
3. Define a project topic, identify the problem and the need for a solution, set aims and scope, identify and set strategies to manage health and safety risk and project completion risk.
4. Conduct a critical review of appropriate literature and write it up in a form appropriate to the research field of your topic.
5. Communicate technical concepts in appropriate ways depending on the topic and intended audience, and make appropriate use of the written word and imagery of various sorts.

Personal Values Attributes (Global / Cultural awareness, Ethics, Curiosity) (PVA):
6. Identify and apply strategies to manage ethical risks associated with your research, including safety and sustainability considerations.
7. Demonstrate the capacity to learn by research, including review of previous work and conducting your own research with curiosity and creativity.

How will I be assessed?

You will write a substantial thesis to be submitted towards the end of the academic year. This will be of 10000 to 12000 words in length.

Your thesis must be a record of your research aims, method, results, discussion and conclusions, and must make clear your understanding of previous work, the specific research question(s) you have addressed and your contribution to knowledge.

This submission will be worth 100% of the module marks. It will assess all module learning outcomes.

In addition, you will be required to complete an online research ethics submission in line with University policy. This is a pass/fail component of assessment and is a requirement of every person undertaking research and no marks can be awarded without it. If you fail to submit and receive ethics approval you will be limited to how you can progress in your research project, impacting significantly on your ability to meet all module learning outcomes. Without a ‘pass’ result, the internally moderated mark for your dissertation will not be confirmed at the Progression and Awards Board (PAB) but will be retained by the Module Leader until such time that you present evidence to confirm you have received Research Ethics Approval to be granted a 'pass’.

You will receive regular formative feedback via meetings with your supervisor which you are expected to arrange as required, typically at least weekly throughout the teaching periods of semesters 1 and 2.

Pre-requisite(s)

N/A

Co-requisite(s)

N/A

Module abstract

Research into the solution of problems is a vital skill for civil engineers and is a vital employability skill which will be applicable in many different ways throughout your career. This module allows you to develop your research skills by means of a substantial individual project based on an area of civil engineering related research, which will typically be related to research being undertaken by the academic staff of the department. This might encompass the creation of new knowledge and new techniques, their deployment in industry, the study and refinement of known problems or work with specific external organizations such as civil engineering or construction companies on a project related to their business. It could also encompass a design or construction in which external collaborators are involved. You can choose from a variety of research methods, including (but not limited to) laboratory testing, field testing, computer modelling, social research methods on the ‘people’ aspects of civil and construction engineering. You will work with an individual academic supervisor as well as with other members of teams such as university technicians or staff of external partner companies. We will suggest topics for you to choose, but you may also be able to develop your own ideas in consultation with academic staff. The expectation is that, whilst you will learn research skills relevant to your career, you will also make a real contribution to the advancement of knowledge in civil or construction engineering and will produce a substantial written output that will remain as a record of your achievement and which you can use to demonstrate your abilities to potential employers.

Course info

UCAS Code H201

Credits 40

Level of Study Undergraduate

Mode of Study 4 years full-time or 5 years with a placement (sandwich)/study abroad

Department Mechanical and Construction Engineering

Location City Campus, Northumbria University

City Newcastle

Start September 2022 or September 2023

Fee Information

Module Information

All information on this course page is accurate at the time of viewing.

Our Campus based courses starting in 2022 and 2023 will be delivered on-campus with supporting online learning content. We continue to monitor government and local authority guidance in relation to Covid-19 and we are ready and able to adjust the delivery of our education accordingly to ensure the health and safety of our students and staff.

On-campus contact time is subject to increase or decrease in line with any additional restrictions, which may be imposed by the Government or the University in the interest of maintaining the health and safety and wellbeing of students, staff, and visitors. This could potentially mean increased or fully online delivery, should such restrictions on in-person contact time be required.

 

Current, Relevant and Inspiring

We continuously review and improve course content in consultation with our students and employers. To make sure we can inform you of any changes to your course register for updates on the course page.


Your Learning Experience find out about our distinctive approach at 
www.northumbria.ac.uk/exp

Admissions Terms and Conditions - northumbria.ac.uk/terms
Fees and Funding - northumbria.ac.uk/fees
Admissions Policy - northumbria.ac.uk/adpolicy
Admissions Complaints Policy - northumbria.ac.uk/complaints